8. Basic Opera
Insert one end of the DP cable into your PC’s graphics card. A HDMI cable may also
be used. A HDMI cables is not included.
2. Connect the other end of the cable to the corresponding connector on your monitor.
3. Connect the power cable to your monitor then connect the other end to your power
source. It is recommended that you use a surge protector with adequate voltage if a wall
outlet cannot be reached directly .
4. Press the power buon to turn on the monitor.
1.
FreeSync
The feature itself is off by default. In order to use this feature, please note you must have
hardware with FreeSync capability, an DP cable, and the latest graphic drivers. To use
this feature, connect your computer an
d monitor with an DP cable. A er connec ng,
you may receive a prompt to enable the feature on your computer. If you do not receive the
prompt, you may need to enable the func
on in your graphics card menu. See your graphics
card manufacturer’s documenta
on for instruc ons on how to turn on and/or enable FreeSync.
Eng-8
To Next Page
Loading...
Need help?
General