2
SAFETY
The following instructions pertain to possible hazards, such as fire, electrical shock, and
bodily injury risks. Please read and follow all of these instructions carefully.
1.
Always connect this Panel PC to an appropriate power source as indicated on
the
information label located on the back of the housing.
2.
Always follow proper installation guidelines to ensure that your Panel PC meets
and
adheres to the designated safety standards.
3.
This Panel PC is sealed and does not have any openings. An internal fan
provides
the unit with needed cooling and ensures reliable operation via convection cooling.
4.
Do not use this Panel PC on an unstable cart, stand, or table. The Panel PC may fall
and
cause serious damage to it.
5.
Follow all of the instructions and warnings marked on the unit and included in the
manual.
6.
Save these instructions for later use.
WARNING: Explosion Hazard. When working in Class I, Division 2 certified
areas, make sure that your area is known to be non-hazardous before you connect
or disconnect equipment and before you remove and replace fuses. Connecting
and disconnecting the equipment in a hazardous area may produce sparks,
causing the area to ignite.
To Next Page