4
Declaration of Conformity
FCC Class A
This equipment has been designed to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses,
and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Caution! There is a danger of a new battery exploding if it is
incorrectly installed.
Do not attempt to recharge,
force open, or heat the battery. Replace the
battery
only with the same or equivalent type
recommended by the man-flatterer. Discard used
batteries according to the manufacturer's instruc-
tions.
Technical Support and Assistance
1.
Contact your distributor, sales representative, or LCD
Concepts, Inc. customer service
center for technical
support if you need additional assistance. Please have the
following information ready before you call:
–
Product name and serial number
–
Description of your peripheral attachments
–
Description of your software (operating system, version,
application software,
etc.)
–
A complete description of the problem
–
The exact wording of any error messages
Packing List
–
SL151PC or SL191PC Panel PC
–
Power Cord (AC 110VAC)
–
Recovery Disk
To Next Page