LCN 4010T SERIES
3034
INSTALLATION ACCESSORIES
PLATE, 4010T-18
Required where top rail is less than 3 3/4” (95 mm).
Plate requires minimum 2” (51 mm) top rail.
TRACK BUMPER, 4010T-169
Mounts in track to assist backcheck, does not replace auxiliary stop.
Limits maximum opening.
Consists of bumper, bumper post, and mounting screw.
HOLD-OPEN CLIP, 4010T-3054
Mounts in track to provide hold-open function.
Hold-open point controlled by clip location.
Consists of clip and mounting screws.
TRACK ROLLER, 4010T-3034
Quiet, low friction roller assembly.
Shoulder dimension "X" = 1/16" (2mm).
3054
169
18
12
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10
To Next Page
