Need help?Do you have a question about the LD LDHPA1 and is the answer not in the manual?
Balanced audio input left/right with 3-pin female XLR sockets.
Unbalanced stereo input with 3.5 mm mini jack.
Connection for external power pack or 9V battery.
3.5 mm stereo jack socket for connecting headphones.
On/Off switch and volume control. Turn knob clockwise to turn on, counter-clockwise to turn off.
Adjusts volume balance between left/right channels or mixes mono signals.
Selects stereo playback or mixes two mono signals for mono playback.
Indicates audio signal presence (green) and signal limiting (amber).
Indicates battery charge level (green for good, red for low).
Instructions for opening, removing, and inserting a 9V battery.
How to securely attach the amplifier to a belt or strap using the metal clip.
Guidelines for environmentally friendly disposal of the product at the end of its life.
General| Product Type | Power Amplifier |
|---|---|
| S/N Ratio | > 100 dB |
| Line Inputs | 2 |
| Weight | 9.8 kg |
| Signal to Noise Ratio | > 100 dB |
| Frequency Response | 20 Hz - 20 kHz |
| THD | <0.1% |
| Input Impedance | 20k Ohms |
| Protection | DC, short circuit, thermal |
| Controls | Power switch, volume control (per channel) |
| Indicators | Power, Signal, Clip, Thermal |
| Line Input Connectors | XLR |
| Operating Voltage | 220-240 V AC, 50-60 Hz |
| Height | 88 mm |
| Width | 483 mm |
| Total Harmonic Distortion | <0.1% |
| Output Impedance | 4 Ohms, 8 Ohms |
| Dimensions | 483 x 88 x 317 mm |
To Next Page
