Need help?Do you have a question about the LD MAUI 11 and is the answer not in the manual?
A welcoming message from the manufacturer, thanking the user for purchasing the product.
Comprehensive list of safety precautions and guidelines for proper handling and operation of the device.
Guidelines for safely transporting the LD MAUI 11 PA System, including placement and cooling requirements.
Instructions on how to assemble the LD MAUI 11 PA System's components, subwoofer and array column.
Details on connecting audio sources and operating the system, including volume control and connections.
Adjusts the subwoofer volume relative to the array columns, with a basic setting recommendation.
Sets the overall system volume, also influencing the subwoofer level.
Explains the meaning of the ON, SIGNAL, LIMIT, and PROTECT indicator lights for system status.
Describes the connection between the subwoofer and the array column using the multipin connector.
Details the unbalanced RCA line input for audio sources.
Details the balanced XLR/6.3 mm jack combo line input.
Describes the balanced XLR output for connecting to other active loudspeakers.
Location and function of the power ON/OFF switch for the unit.
Information on the AC power connection via IEC connector with fuse holder.
Explains the acronym LECC (Limiter, EQ, Compressor, Crossover) and the role of DSP.
Details the functions of limiters, EQ, compressor, and crossovers in optimizing audio performance.
Outlines the terms and conditions of the product's limited warranty for original purchasers.
Specifies the extent of the manufacturer's liability regarding product performance and damages.
Instructions on how to contact Adam Hall or an authorized reseller for warranty service.
Declaration that the device meets essential requirements of relevant EU directives.
Guidelines for the proper disposal and recycling of the product as electrical waste.
Information regarding the WEEE directive and proper disposal of electronic equipment.
Guidance on recycling or disposing of batteries and accumulators responsibly.
Tips for saving energy and protecting the environment by managing equipment usage.
General| Colour | Black |
|---|---|
| Subwoofer magnet | Ferrite |
| Subwoofer cabinet construction | Bass reflex |
| Mid/Hi system magnet | Neodymium |
| Amplifier class | Class D |
| Line output connectors | XLR |
| Frequency response | 50 Hz - 20 kHz |
| Features | Bluetooth |
| Subwoofer brand | LD Systems |
| Subwoofer cabinet material | MDF |
| Subwoofer surface | Textured paint |
| Mid/Hi system brand | LD Systems |
| Mid/Hi system surface | Textured paint |
| Protection circuits | thermal |
| Controls | Volume |
| Indicators | Power, Signal |
| Line inputs | 2 |
| Line input connectors | XLR/6.3 mm Jack combo |
| Line outputs | 1 |
| Mid/Hi system cabinet construction | Sealed |
To Next Page
