Need help?Do you have a question about the LD MAUI 28 G2 and is the answer not in the manual?
Please read these instructions carefully. Keep all information and instructions in a safe place. Follow the instructions.
Safety precautions for connecting the device to the power mains, including grounding and voltage checks.
Warning about potential hearing damage due to high sound pressure levels (SPL) and exposure limits.
Overview of the MAUI® all-in-one column systems, highlighting Class D amplification and DSP technology.
Guidelines for system setup, placement, cooling, cable connections, and power-on/off procedures.
Describes the three components and how to connect them for the MAUI28G2 array system.
Details connecting source devices and adjusting volume for the system and subwoofer.
Explains SUB LEVEL, MAIN LEVEL, MIC LEVEL, LINE LEVEL, HI-Z LEVEL, and MP3/BLUETOOTH LEVEL controls.
Explains the function of the ON, SIGNAL, LIMIT, and PROTECT indicator LEDs.
Controls the mono or stereo mode and setup indicator LEDs for system configuration.
Details MIC IN, LINE IN (RCA/XLR), HI-Z INPUT, MP3 INPUT, SYSTEM OUT, SUB OUT, and POWER CONNECTOR.
Explains the functions of Limiter, EQ, and Crossover features within the DynX® DSP.
Visual examples of Mono and Stereo operating mode connections.
Lists available accessories for the MAUI28G2 system.
Provides detailed technical data for the MAUI28G2 system, including amplifier and DSP characteristics.
Information on warranty, service requests, and liability limitations.
Guidelines for disposal, FCC statement, and CE compliance.
General| Type | Active Column PA System |
|---|---|
| Frequency Response | 45 Hz - 20 kHz |
| Amplifier | Class D |
| Cabinet Construction Subwoofer | Bass Reflex |
| Cabinet Material Column Speaker | Aluminum |
| Coverage | 120° |
| Connectivity | XLR, 6.3 mm Jack, RCA |
| Components | 12" Woofer, 16 x 3" Full-Range |
| Protection Circuits | Overcurrent, Thermal |
To Next Page
