LDARC KK Series User Manual

KK SERIES
Feature
* Top configuration FPV-Drone
* KK Series used RunCam Swift Mini camera(1/3 SONY CCD)
* Outdoor FPV design,Frame arm uses 5.0mm thick carbon plate,it is very strong.
* BLheliS 4in1 20A and 40A ESC ,support MULTISHOT,ONESHOT and DSHOT
provedes a better user experience.
* Modular design, with the betaflight firmware.
Instruction Manual
User manual and video please visit:WWW.LDARC.COM
180607

LDARC KK Series Specifications

General

Weight	Unknown
Flight Controller	Integrated (usually F4 or similar)
ESC	Integrated (usually 4-in-1, amperage varies by model)
Battery	Unknown
Model	KK Series
Category	Drones
Motors	Brushless (size varies by model, e.g., 1102, 1103)
VTX	Integrated (usually 25mW or switchable power)
Motor	Brushless (size varies by model, e.g., 1102, 1103)
Video Transmitter	Integrated (usually 25mW or switchable power)

Summary

KK 220 Drone Configuration

KK 220 Specifications

Lists key technical specifications for the KK 220 model.

KK 220 Package Contents

Details all items included in the KK 220 package.

KK 5GT Drone Configuration

KK 5GT Specifications

Lists key technical specifications for the KK 5GT model.

KK 5GT Package Contents

Details all items included in the KK 5GT package.

KK Tower 20x20 Component Overview

VTX, Camera, and Receiver Connections

Illustrates connections for VTX, Camera, and Receiver modules.

FC, LED/Buzzer, and VTX Control

Covers FC connections, LED/Buzzer, and VTX control via buttons and LEDs.

KK SUPER TOWER 30.5x30.5 Component Overview

VTX Control and Frequency Table

Details VTX operations, frequency adjustment, and a comprehensive frequency table.

Motor and Receiver Setup

Propeller Installation Guidance

Advises on checking motor rotation direction when installing propellers.

DSM2 Receiver Binding and Modes

Details DSM2 receiver binding, modes, and serial provider selection.

XM and FS-RX2A Receiver Configuration

XM Receiver S.BUS Binding and Modes

Details S.BUS binding for XM receiver and receiver mode selection.

FS-RX2A Receiver PPM Binding and Modes

Details PPM binding for FS-RX2A receiver and receiver mode selection.

FM800 Receiver and Mode Switching

FM800 Receiver S.BUS Binding

Details S.BUS binding for FM800 receiver and receiver mode selection.

Receiver Mode Switching Procedures

Details procedures for switching receiver modes between PPM and S.BUS.

Betaflight Firmware Update Process

Configurator Setup and Firmware Flashing

Guides on setting up Betaflight configurator and flashing firmware to the flight controller.

Serial RX and ESC/Motor Configuration

Details configuring Serial RX and ESC/Motor features like DSHOT600.

PID Tuning and Advanced Features

PID, Filter, and Feature Settings

Details PID settings, filter adjustments, and other flight features.

Transmitter Mode Assignment

Guides on assigning flight modes to transmitter channels for operational control.

Flight Performance Tuning and Modes

Filter Settings and Tuning Advice

Provides guidance on adjusting gyro and D term filters for optimal flight performance.

Mode Configuration and Transmitter Assignment

Details assigning flight modes to transmitter channels for operational control.

After-Sales Service and Quality Control

Service Policy and Reparation

Details free and paid reparation services for product defects and damage.

PNP/RTF Test and QC Procedures

Outlines the PNP/RTF test report items and quality control checks.