LDARC TINY GT7 - Battery Voltage

-4-
Smart OSD V1
Operating Instructions
1.Battery voltage
2.Alarm voltage(recommended set to 3.3V or 3.4V)
3.Auxiliary line
4.Camera mode settings
5.Time display
6.User name settings
7.40s no key operation,it will exit OSD setting interface
Auto PLA NTSC
Open , Close , Back
Button
Press and hold the
button,then power on
Enter the OSD Settings screen
Short press button,select
menu and configuration
Long press button,enter
menu and configuration
Power on,then hold the button
Short press button,Change frequency
Press and hold the button 30s,VTX restore
factory settings(white LED flashing)