CARE AND MAINTENANCE
Store Turtle Motion 625 out of direct sunlight and covered where possible and when storing for
extended periods of time. Turtle Motion 625 should not be exposed to harsh weather conditions such
as snow, heavy rain and strong winds.
Wait for Turtle Motion 625 to cool down completely before moving or covering with Le Feu Cover.
The outer shell of Turtle Motion 625 may fade over time and through use. This will not affect
performance.
Grease and tomato acid aerosols from baking pizza may condensate on the outside of the shell. Clean
the outside of the oven with mild soapy water and a soft sponge when it has cooled down. Wipe it dry
with a clean cloth. The pizza oven must be dry when you stove it away or cover it. Negligence to
comply with this may result in surface alterations not covered by the warranty.
Regularly inspect the burners for clogging and clean if necessary. Be careful not to bend the igniter
electrodes or the fire safety device when cleaning.
Spilling of pizza topping may interfere with the turning mechanism. Regularly clean around and under
the pizza stone to avoid building up of debris. If pizza stone is blocked by debris, stop the turning
motor, shut off the fire and let the oven cool down before you clean under the stone.
Warning:
The pizza stone is heavy and fragile. Avoid dropping it on the floor due to risk of breaking. The pizza
stone is of ceramic material, It can absorb water and if heated on full power it risk to break due to
water vapor pressure. Small debris may break off the edge without affecting the performance and life
time of the baking stone.
To Next Page
Loading...