light
Igniter fails to ignite the gas:
• No cking sound is heard.
• Ticking sound is heard but no visible
sparks.
No gas arriving to burner:
(Gas flow should be audible in quiet environment)
• Gas bole empty
• Regulator shut off or not properly
mounted.
• Gas hose twisted or squeezed
is not missing, reversed, discharged
Check that igniter electrode and
short circuit the spark.
Check that the electrode has not
been bent away from the burner.
WARNING!
Check user-guide for regulator.
Check that gas hose is straight.
o or
when (Gas
should be
audible in quiet
environment)
Gas regulator not giving enough gas out.
If ambient temperature is extremely low pressure may
drop in gas bole Indeed if gas bole is less than ¼ full
The power of Turtle Moon 625 is 8kW. The liquid gas
in gas bole must evaporate to come out, and this
leads to lowering further the temperature in the gas
bole thus making it harder for regulator to provide
gas.
Ice clogging in regulator if frozen in wet condion.
Obstrucon of gas flow
Check user-guide for regulator.
temperature before cooking.
Avoid using almost
very cold weather.
Thaw regulator and store it in dry
2. Low on propane gas
1. Turn front of oven away from
wind. Consider if the chosen place is
appropriate, and move the pizza
oven to a mess wind exposed place
2.1
above
2. Excessive fat in meat
3. Excessive cooking temperature
2. Trim fats from meat before
cooking
3. Adjust (lower) temperature
accordingly
pizza
stone, or accept this proof of high
temperature cooking (taking care not
to
burner tube,
roaring
sound from
burner)
1. Burner and/or burner tubes are blocked
(Flashback creates excessive heang of burner
construcon as well as carbon monoxide and must be
stopped immediately by turning off the appliance.
Let
it cool down for a couple of minutes).
Clean burner
and/or burner tubes.
valve is fully open (if applicable) and
relight.
Check the regulator
To Next Page
Loading...
