M.V.S. Specifications
Power Source Requirements 230VAC 300 Watt 50Hz
External Fusing 3.15AT ceramic
Internal Fusing 500mA PCB transformer
VLM (very low mass) stainless steel replaceable vapour tube
Virtually Instant Operation
Fluid Capacity 2.5 Litres Bottle Carrier
Fluid Use - Max 100cc / Hr.
Min 1cc /Hr.
Haze Flow direction 0 degrees to 90 degrees
Control Manual or DMX
DMX 512 4 channels Haze, Projection, Angle, Sweep
Machine Dimensions H.340mm W.160mm D.340mm
Weight, (Fluid Not Included) 12Kgm.
Technological Improvements
Combined manual and DMX control. Memory Storage. Simplified high current
control of vapour tube using advanced software. High power air pump. Electronic
control of Haze output, Projection distance, and Angle of haze output. Advanced
and unique motor control stabilizes fan output over the widest possible range.
Larger diameter hazing tube combined with higher temperature cleaning regime for
greatly extended working life. Spot welded shielded larger gauge thermocouple
sensor. Multiple operating positions possible. Detachable fluid carrier option.
4
To Next Page
Loading...
