Need help?Do you have a question about the Leader LV 5770 and is the answer not in the manual?
General| Brand | Leader |
|---|---|
| Model | LV 5770 |
| Category | Measuring Instruments |
| Language | English |
Details LEADER's obligations and limitations for free services during the warranty period.
Covers essential safety measures and operational guidelines for using the instrument.
Information regarding trademarks and the MD5 algorithm used in the instrument.
Defines key terms and concepts used throughout the instruction manual.
Provides an overview of the LV 5770 waveform monitor's capabilities and design.
Highlights the key technical features and capabilities of the LV 5770 instrument.
Details the supported SDI video signal formats and their corresponding standards.
Specifies the format for embedded audio playback for various LV 5770 models.
Describes the SDI input and output connectors for specific LV 5770 models.
Advises against opening the instrument case and inserting foreign materials.
Specifies safe operating temperature, humidity, and atmospheric conditions.
Details precautions related to using the correct power source and power cord.
Instructions for attaching and removing the power cord cover/inlet stopper.
Procedure for powering the instrument on and off, including standby mode.
Provides an overview of the instrument's signal input and output capabilities.
Details how to connect and use external sync signals for various input formats.
Guides on switching between 1-screen and multi-screen display modes.
Explains how to select between SDI and CMPST input signals for measurement.
Details how to choose between WFM, VECT, PIC, AUDIO, STATUS, and EYE display modes.
Procedure for measuring SDI signals using the LV 5770SER08/09A.
Steps for measuring audio signals embedded within SDI signals.
Guide for measuring analog audio signals applied to the rear panel connector.
Configuration for multi-display, capture mode, and memory store options.
Settings for network connectivity, including IP address and server configurations.
Procedure for resetting instrument settings to factory defaults.
Instructions for capturing still images of the display.
Procedure for capturing single frames from SDI signals.
Guide on saving captured screen or frame data to USB memory.
Steps for saving current panel settings as presets.
Instructions on how to recall saved panel settings.
Process for copying all presets to or from a USB memory device.
Diagram and description of the 15-pin D-sub remote control connector.
Table detailing BIT control for loading presets via the remote connector.
Procedure for remotely controlling the LV 5770 via TELNET.
Instructions for transferring files using the LV 5770's FTP server.
Details on controlling the LV 5770 and notifying SNMP managers of errors.
Guide to controlling the LV 5770 via a web browser.
Procedure for synchronizing the LV 5770's time with an NTP server.
Illustrates the menu structure for configuring system settings.
Shows the menu tree for screen and frame capture operations.
Diagram of the menu for registering, deleting, and copying presets.
Illustrates the menu structure for loading saved presets.
Details software updates including audio signal gate for lip sync measurement.
Notes the addition of the CINELITE Advanced feature.
To Next Page
