To Next PageTo Next Page
Need help?Do you have a question about the Leader LV5600 Series and is the answer not in the manual?
Do not remove instrument case/panels. Avoid foreign materials entering the instrument.
Operating temperature/humidity ranges, explosive atmosphere precautions, and condensation.
Use correct voltage, frequency, and grounding. Handle power cord safely.
Covers maximum input voltage, mechanical shock, electrostatic damage, and warm-up time.
Details SD, HD, 3G-A, 3G-B-DL, 3G-B-DS, 3G(DL)-2K, 3G(DL)-4K, HD(QL), 3G(QL) video formats and standards.
Procedure for powering the instrument on and off using the power switch.
Explains how to connect USB memory devices, mice, or touch panel monitors.
Explains how to configure the INPUT menu settings and input format display.
Details procedures for measuring various SDI and IP signal formats.
Guides on configuring input systems for SDI and IP signals via the SDI IN SETUP1 tab.
Describes how to capture still-image data of the screen and save it.
Explains capturing single frames or consecutive frames from SDI or IP signals.
Procedure for saving panel settings to memory for easy recall.
Explains how scales and cursors for HDR signals are displayed on the waveform.
Guides on setting up error detection for SDI signals, ancillary data, and embedded audio.
Covers IP status display, packet jitter, PTP status, SFP, and packet header information.
Details automatic measurement items like amplitude, rise time, fall time, timing jitter, and overshoot.
Covers error detection settings for 12G, 3G, HD, and SD signals for eye pattern display.
Explains how to remotely control the instrument using TELNET commands.
General
