To Next PageTo Next Page
Need help?Do you have a question about the Leader LV7600 Series and is the answer not in the manual?
General| Contrast Ratio | 1000:1 |
|---|---|
| Aspect Ratio | 16:9 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Resolution | 1920 x 1080 (Full HD) |
| Input Voltage | AC 100 V to 240 V |
Covers essential safety and operational guidelines for using the instrument to prevent damage or injury.
Highlights key features such as signal input support, superb operability, compact design, and 4K/IP video format support.
Describes the front panel layout, including LCD, function keys, power switch, and input/output controls.
Details the rear panel connectors and ports, including SDI, IP, audio, reference, remote, and ground terminals.
Procedure for powering the instrument on and off using the power switch.
Details the signal input and output configurations for SDI, IP, and audio interfaces.
Explains fundamental operations like displaying and navigating menus, and using control interfaces.
Details how to configure input signals, including selecting input modes and display channels.
Provides procedures for measuring various SDI signal formats like SD, HD, 3G, 6G, and 12G.
Explains how to select different measurement displays like WFM, Vector, Picture, Audio, Status, and Eye.
Describes the functions assigned to operation keys and how they can be customized.
Covers configuration of input systems for SDI and IP, including signal assignment and format settings.
Explains how to configure general instrument settings, function menus, capture features, and network parameters.
Step-by-step guide on how to save current panel settings as a preset.
Procedure for recalling previously registered panel settings.
Explains the functions of the operation keys used within the Video Signal Waveform display.
Details how to configure display settings such as mode, channels, parade, and intensity.
Explains how to adjust gain and select filters for optimizing the video signal waveform display.
Covers configuration of sweep methods, line display formats, and field display formats.
Provides instructions for turning cursors on/off, selecting cursors, and adjusting display values.
Explains how to select color matrices, turn luminance signals on/off, and set composite display formats.
Details how to switch display modes and adjust waveform intensity and color.
Covers adjusting scale intensity, color, IQ axes, and selecting scale types.
Explains how to set variable and fixed vector gain, including specific magnification values.
Explains how to select color matrices, display 75% color bars, and choose composite display formats.
Instructions for configuring the scale, including color scales, triangles, and sub-scales.
Details on setting the display mode (DIAGRAM/TEMP), display standard, clipping, and gamma values.
Guide to selecting picture display modes like FIT, REAL, X2, and FULL FRM.
Instructions for adjusting picture settings including color, brightness, contrast, gain, and bias.
Instructions for selecting input signals, audio groups, and assigning headphone output.
Guide to selecting display modes for audio, including Lissajous, Surround, Meter, and Status.
Details on configuring error detection and meter display settings for audio signals.
Provides an overview of the status display, covering signal, format, frequency, cable, and error information.
Details error detection settings for SDI, ancillary data, embedded audio, and video errors.
Explains automatic measurement of amplitude, jitter, rise/fall times, and overshoot.
Details jitter measurement, including plotting jitter component on a time graph.
Explains error detection settings for 12G, 3G, HD, and SD signals.
