Name: Leaf CREDO
Brand: Leaf
Rating: 5 (1 reviews)

To Next Page

To Previous Page

8 9

5. While holding down the back release button, push the back and

camerabodytogetherrmly.

6. Release the back release button.

7. Slide the back lock to the locked position (towards the camera).

Note: Your back should always be protected by its sensor cover

plate when it is not attached to the camera.

4. Mounting the Leaf

Credo Back

1. Remove the back cover from the camera.

2. Unlock the back by sliding the back lock away from the camera.

3. While holding down the back release button, remove the sensor

cover plate from the back.

4. Place the bottom part of the back in the lower locking

mechanism on the back of the camera body.

Questions and Answers:

Need help?

Do you have a question about the Leaf CREDO and is the answer not in the manual?

Leaf CREDO Specifications

General