• Do not touch hot surfaces.
• Unplug from the outlet when not in use
and before cleaning. Allow to cool before
putting on or taking off parts, and before
cleaning the appliance.
• The use of accessory attachments is not
recommended by the appliance manufacturer
and may result in fire, electric shock or cause
injuries.
• To disconnect, turn any control to ‘Off’,
then remove plug from the wall outlet.
• Scalding may occur if the lid is removed
during the brewing cycle.
• The base must not be immersed.
• The heating element surface is subject to
residual heat after use.
• Children shall not play with the appliance.
Handy Hints
• Always use the appliance first to froth/
heat your milk. While operating, prepare your
coffee or hot chocolate.
• Use whole milk for best results.
• Keep the whisks in a safe place – they are
small and can be easily misplaced.
• After each froth/heat cycle, wait 2 minutes
to allow the thermostat to rest. After 2
minutes, the appliance can be used again. To
shorten this time, rinse with cold water and
wipe dry after each use.
• This appliance is designed to heat plain
milk only.
Before First Use
1. Carefully remove the appliance from the box
and remove any packaging materials.
2. Clean the jug and accessories as described
in this manual, before first use.
3. Fully unwind the power cord.
4. Place the appliance on a flat and level
surface. Insert whisk firmly onto the shaft at
base of the jug.
5. Pour milk into the jug according to the ‘Min’
and ‘Max’ markings inside. Max capacity
chart is below for your reference.
6. Place lid firmly onto the jug.
7. Insert power plug into the power point.
8. Press to select the right setting, then
press to start.
9. The appliance can switch off automatically
once it finishes working. You can press
to turn off the appliance at any time.
To Next Page
Loading...