To Next PageTo Next Page
Need help?Do you have a question about the Leak STEREO 130 and is the answer not in the manual?
General| Frequency Response | 20Hz - 20kHz (+/-0.5dB) |
|---|---|
| Weight | 8.3 kg |
| Standby Power Consumption | <0.5W |
| Power Output | 45W per channel (8 ohms) |
| Total Harmonic Distortion | <0.005% (1kHz, 45W, 8 ohms) |
| Inputs | 4 x RCA |
| Outputs | 1 x Headphone |
| Input Impedance | 10k ohms (line level) |
| DAC | ESS Sabre32 ES9018K2M |
| Digital Input Sampling Rate | DSD256 |
| Bluetooth | aptX |
Details fuse values for different voltage ranges.
Instructions for unpacking the LEAK STEREO 130 amplifier and accessories.
Information on downloading Windows drivers and firmware updates.
Guidance on placing the LEAK STEREO 130 on a stable surface.
How to connect the LEAK STEREO 130 to the AC mains supply safely.
Details on connecting coaxial and optical digital outputs.
Explains preamplifier, loudspeaker, and headphone outputs.
How to connect analog sources like CD players or DACs.
Connecting turntables with MM or high output MC cartridges.
Connecting digital sources like CD/DVD players, DACs, PCs.
Procedure for updating firmware via the USB port.
Explanation of the grounding terminal for noise reduction.
How to use and configure the standby mode and auto standby features.
Instructions for adjusting volume and using the mute function.
How to play music from analog sources connected to AUX inputs.
How to play music from digital sources via COAX or Optical inputs.
How to play music from a computer via USB.
How to stream music wirelessly via Bluetooth.
How to adjust the bass and treble controls for audio response.
How to adjust the balance control for left/right speaker output.
Explanation of the Direct mode and its effect on sound.
Information on the amplifier's protection mode against overload.
Details on warranty start date, proof of purchase, and service.
List of situations and products not covered by the warranty.
Instructions on how to initiate a warranty claim.
Guide to installing the LEAK USB driver for asynchronous mode.
Instructions for installing the USB driver on Windows operating systems.
Steps to adjust the audio sample rate in Windows sound settings.
Guide to installing Foobar2000 and necessary plugins for PCM/DSD.
Steps to configure ASIO driver output settings in Foobar2000.
Steps to configure the SACD plugin for DSD playback in Foobar2000.
Guide to setting up iTunes for PCM audio playback on Mac OS X.
Instructions for configuring audio devices using Audio MIDI Setup on Mac.
Guide to setting up Audirvana Plus for PCM/DSD audio on Mac OS X.
How to select the LEAK USB Audio 2.0 Output as the preferred device in Audirvana.
