6
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of
the unit, use a screwdriver to loosen the
screw and open the battery box.
3. Remove the old battery by pulling up on
one side of the battery.
4. Install 1 new CR2450 battery as
illustrated.
5. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
•
Use one CR2450 Lithium ion coin battery only
for this toy.
Do not use a rechargeable
Lithium ion battery LIR2450.
This toy is not
compatible with LIR2450.
•
The coin battery used with this product
should be kept
away from small children who
might still put things in their
mouths. If the
coin battery is swallowed, consult a docto
r
immediately.
•
Insert the coin battery with the correct
polarity.
• Do not use damaged coin battery.
• Do not short-circuit the coin battery terminals.
• Remove exhausted coin battery from the product.
• Remove coin battery during long periods of non-use.
• Do not dispose of coin battery in fire.
• Do not charge non-rechargeable coin battery.
• Do not mix old and new batteries.
•
Do not mix batteries of different types: alkaline,
standard
(carbon-zinc) or rechargeable (nickel-
cadmium).
To Next Page
Loading...
