11
Wireless Controller
1. Interrupt the power supply by removing the batteries.
2. Let the unit stand for 10 seconds, then replace the batteries.
3. The unit will now be ready to play again.
4. If the unit still does not work, replace with an entire set of
new batteries.
OTHER NOTES
Static electricity may cause the HDMI Game Stick to malfunction. In cases
where the HDMI Game Stick is malfunctioning due to static electricity,
disconnect the Micro USB Power Cable, wait for 10 seconds, then
reconnect the Micro USB Power Cable to reboot the HDMI Game Stick.
DECLARATION OF CONFORMITY
Hereby, Leapfrog, a division of VTech Electronics Europe Plc, declares that
the radio equipment type 6132 is in compliance with The Radio Equipment
Regulations 2017 (2017 No.1206). The full text of the Declaration of
conformity is available at the following internet address:
www.leapfrog.com/en-gb/legal/eudoc
Frequency Band: 2408 MHz – 2472 MHz
Maximum RF power: <0.01 W
®
The terms HDMI, HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
HDMI game stick connects TV USB A or 3rd party AC adapter
with DC 5V 1A output through Micro USB Power cable
To Next Page
Loading...
Need help?
General
