8
TOUCH SCREEN CALIBRATION
Your LEAPSTER™ handheld touch screen has already been calibrated for use, but if you
should see either example below, you may adjust this calibration yourself.
• Lines drawn with the pen appear to be offset from the location of the pen tip.
• Objects you are trying to select are not being chosen.
Should this happen, follow these steps to calibrate the touch screen on your LEAPSTER
handheld:
1) Ensure that a cartridge is NOT inserted.
2) Press the power button to turn on your system.
3) When the “game selection screen” appears, press these buttons all at the same time:
• the “B” button
• the “Hint” button
• the “Home” button
4) You’ll see a message that says “Press the “A” button to begin.”
5) Follow the on-screen instructions.
COUNTRY SELECTION
Selecting your country of residence adjusts the phonetic pronunciation of some letters
to better match the country’s language.
If you need to change your country selection, follow these steps:
1) Ensure that a cartridge is not inserted.
2) Press the power button to turn on your system.
3) When the “game selection screen” appears, press these buttons all at the same time:
• the “Home” button
• the “D-pad right arrow” button
• the “B” button
4) Follow the on-screen instructions.
To Next Page
Loading...