EasyManuals Logo

LeapFrog Learn & Groove Dancing Panda User Manual

LeapFrog Learn & Groove Dancing Panda
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back ON. The unit will now be ready to play
again.
5. If the unit still does not work, replace with an entire set of
new batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LeapFrog Learn & Groove Dancing Panda and is the answer not in the manual?

LeapFrog Learn & Groove Dancing Panda Specifications

General IconGeneral
BrandLeapFrog
ModelLearn & Groove Dancing Panda
CategoryToy
LanguageEnglish

Related product manuals