2. Charge the Baby Monitor
When you connect and power on Parent Viewer, its battery will
charge automatically.
Battery Indicators Battery Status Action
The screen
displays
. The
light flashes.
The battery is low in
power and may only
be used for a short
time.
Charge without
interruption
(about 30
minutes).
The battery icon
becomes solid
.
The battery is fully
charged.
To keep the
battery charged,
connect it to AC
power when not
in use.
The battery icon on the viewer indicates the battery status:
Notes:
• Before using the baby monitor for the first time, charge the Parent Viewer and
Baby Unit batteries for 12 hours.
• To shorten battery charging time, turn the units off while charging.
• The standby time varies depending on the sensitivity level you set, your actual
usage, and the age of the batteries.
Notes:
• The rechargeable battery in Parent Viewer is built-in.
• Use only the power adapters supplied with this product.
• If your Baby Monitor is connected to a switch controlled socket, make sure it
is switched on.
• Connect the power adapters in a vertical or floor mount position only.
• Make sure the Parent Viewer, the Baby Units and the power adapter cords are
out of reach of children.
1. Connect the Baby Monitor
To Next Page
Loading...
