9
OTHER NOTES:
Static electricity may cause the Magic Adventures Globe
TM
to malfunction. In cases where Magic Adventures Globe
TM
is
malfunctioning due to static electricity, reset the Globe by pressing
and holding the Power On/Off Button for about 10 seconds until
the LCD Screen turns off, then wait for a while before restarting
the unit. Or, if the static electricity malfunction occurred during
the downloading process, disconnect the USB Cable, delete the
corrupted file, then reset the Globe as described above. Then,
reconnect the USB Cable and restart the download process.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat source.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the
unit to moisture or water.
5. NEVER try to dismantle the unit.
Using the Stylus
• Do not use the Stylus if it is broken.
• Do not look directly into the Stylus light.
• Put the Stylus back in the Stylus Holder when not in use.
Cleaning the LCD Screen
• Slightly dampen a soft, lint-free cloth with water and wipe the
screen to loosen dirt.
• Using a clean and dry cloth, wipe the screen dry. Repeat these
two steps as needed.
To Next Page
Loading...
Need help?
General
