Fig.4
Placement of the product
* Unpack the product, remove the tape
securing the door and the accessories.
Remove the remains of the glue, if any,
with mild cleaning detergent.
* Do not throw the Styrofoam element of
the packaging away. Should you have to
transport the product again, secure the
refrigerator with the Styrofoam elements,
the plastic foil, and Scotch tape.
* Wash the inside of the refrigerator
chamber and the freezer as well as the
accessories with lukewarm water with
some dishwasher liquid and then wipe
it and dry.
* Place the refrigerator in a dry, ventilated
place, out of sun, far from such heat sour-
ces as central heating radiators, etc.
* If you place the refrigerator next to
another refrigerating or freezing unit, the
lateral distance between the appliances
should be at least 2 cm.
* Make sure the product is placed level
adjusting two turn-in front feet of the
refrigerator.
* Once placed, make sure the refrigera-
tor is not standing on the power supply
cord.
* The refrigerator has two rollers in the
back. The rollers, with the front lifted, faci-
litate adjustment moves of the refrigerator
over short distances.
Before You Start
* No adjustments of the cooling unit are
allowed. Make sure that the capillary tube,
located in the recess of the compressor,
is not damaged. The tube cannot be de-
formed, straightened, or coiled.
Damage of the capillary tube by the user
waives the guarantee of the refrigerator.
* For easy opening of the refrigerator door
the distance between the side (the hinges
side) and the room wall (or similar) should
be at least 5 cm.
capillary
tube
To Next Page
Loading...
