8
INSTALLATION
1. Remove the 2 screws on the back.
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a qualified
technician. You should only try to reverse the door yourself if you believe that you are
qualified to do so.
2. Lift the top cover away from the fridge.
3. Remove the screws, then remove the
upper hinge that hold the door in place.
Lift the door and place it on a padded
surface to prevent it from scratching.
To Next Page
Loading...