but it may take some time to achieve the pre-set operating
temperature.
4.4. When the appliance is not in use
When the appliance is not in use for long periods, remove
the contents, disconnect from the electricity supply and
clean the appliance, leaving the door ajar until you wish to
use the appliance again.
4.5. Changing the Interior Light Bulb
Switch off the power supply to the appliance
Remove the screw from the light cover and remove
the cover
Unscrew the bulb from the rear of the light unit.
Replace the bulb with a suitable replacement.
Replace the bulb with a suitable replacement
(ensure same wattage).
Refit the cover and switch the appliance back on.
4.6. Reversing the Door
The door opening can be reversed from “right hand hinged”
to “left hand hinged” if required. If your appliance is
supplied “left hand hinged” simply reverse the following
procedure.
Warning
!
To Next Page
Loading...
