Lec R50263W - Page 16

Remove the plastic UppeCover (1)
 Remove the retaining screws and the Top Hinge (2)
 Remove the plastic Upper Hinge Cover (1)
 Lift the door off the Lower Hinge (4).
 Remove the retaining screws and the Lower Hinge (4)
 Remove the Hinge Pin and Foot from the Lower
Hinge (4), turn the hinge over and refit the Hinge
Pin and Foot.
 Remove the Foot (5) from the left hand side and refit
on the right hand side. Now fit the Lower Hinge (4) to
the pre-drilled holes on the opposite side of the
cabinet
 Now fit the Lower Hinge (4) to the pre-drilled holes
on the opposite side of the cabinet
 Remove the Plastic Caps (6) from the top left hand
side and refit on the right hand side.
 Locate the Door (3) onto the Lower Hinge (4)
and refit the Top Hinge.
 Ensure that the door closes and seals correctly –
tighten all the screws.
 Refit the Top Hinge Cover (1)
4.7. What to do if something goes wrong
1
.
Top Hinge Cover 4.
Lower Hinge Pin/Foot
2
.
Top Hinge 5.
Left Foot
3
.
Door 6.
Left Hand Hinge Holes/Plastic
Caps