9.3 Flexible sacral
cushion
The flexible sacral cushion can be attached
by sliding it over the plastic tongue, using the
fixing snap fastener to secure in place.
9.4 Pelvic harness
(Size 1 or Size 2)
The Pelvic Harness is attached by sliding
the hip guides (A) into the pockets on the
outer face of the harness. It is adjusted to the
desired position by securing it to one of the
snap fasteners (B) on the adjustable hip
guide bracket. The buckle on the tie down
strap is clipped into a receiving buckle (C)
on either side of the seat base. Finally secure
the pelvic harness by attaching the centre
plastic buckle (D).
D
C
B
A
To Next Page
Loading...
