Leckey Mygo - Adjusting Head and Shoulder Supports; Adjusting Shoulder Support Laterals (Size 2); Adjusting Contoured Head Support

10.19 Contoured
headsupport
10.18 Shoulder Support
Laterals (Size 2 only)
To adjust the height, depth and angle of the
contoured headrest, loosen the hand knobs
(A) and when set to the desired position
retighten the knobs. Do not remove the
headrest while the user is in the seat.
Never use the headrest to force the
position of the user’s head.
Always use caution to ensure fingers do
not become trapped when adjusting
the headrest.
To adjust the angle of the shoulder support
laterals, loosen screw A, move laterals to
required angle and retighten.
A
A
A
A