10.7 Grab rail adjustment
To set the depth of the grab rail to suit the
childs reach loosening knob (E) adjust to
the required depth and then re-tighten.
To set the height of the rail, loosen knob (F)
slide the rail to the required height and then
re-tighten.
F
E
10.8 Mobile Chassis
Angle Adjustment
To adjust the angle of the Mobile chassis
loosen the two plastic knobs. Press the
popper and adjust to the angle required,
when the popper has engaged retighten
the plastic knobs securely.
To Next Page
Loading...
