LECTRICEBIKES.COM | 602.715.0907 14
Frame
To unfold:
1. To unfold the bike frame, stand
near the frame where the battery is
exposed. Grab the stem and rear
end of the bike. Lift the bike slightly
off the ground and swing to the
closed position.
2. Push down the latch rmly until it
locks into position. Pull on the latch
to conrm that the latch has locked
and that the frame cannot fold.
To fold:
3. To unlock the bike frame and return
it to the folded position, start by
sliding the switch labeled “open” to
the right.
4. Pull the latch while still holding the
switch to the “open” position. You
may now fold the bike.
1
4
2
3
To fold:
1. Pull up on the silver
button labeled “open”
to unlock the latch.
2. Pull the latch away
from the stem while
still holding the
“open” button.
3. Fold the stem by
lowering it to the side.
1
2
3
Stem Continued
To Next Page
Loading...
Need help?
General
