LECTRICEBIKES.COM | 602.715.0907 15
Pedals
To unfold:
1. Push each pedal down until
you hear an audible click as
they lock into position.
3 4
21
Adjust Handlebar Height
WARNING!
• Always tighten fasteners to the
correct torque to prevent serious
injury or death. Bolts that are too
tight can stretch and deform.
Bolts that are too loose can move
and fatigue. Either condition can
lead to a sudden failure of the
bolt and result in a crash. See
Tightening Torque (p. 19).
Select a height that is comfortable for you. DO NOT extend past
minimum insertion point. To adjust your handlebars, unlatch the
clamp. Move the handlebars to the desired height and close the
clamp. Re-tighten the stem clamp to the recommended torque. See
Tightening Torque (p. 19).
• Always insert the telescoping stem past the minimum insertion
point marked on the stem. A stem that is positioned too high can
damage the bike and can cause you to lose control and crash.
To fold:
1. Grasp pedal and push
lightly toward bicycle.
2. Continue pushing while
raising pedal into its
folded position.
3. The pedal will click into
the folded position.
To Next Page
Loading...
Need help?
General
