17
To adjust seat height:
• Loosen the seatpost clamp. The open and closed positions of the
seatpost clamp are shown below (open position on left, closed
position on right);
• Raise or lower the seat post in the seat tube;
• Check that the seat is straight before and after; and
• Re-tighten the seat post clamp to the recommended torque.
See Tightening Torque (p. 19).
Adjust Seat Position
Always tighten fasteners to the
correct torque to prevent serious
injury or death. Bolts that are too
tight can stretch and deform.
Bolts that are too loose can move
and fatigue. Either condition can
lead to a sudden failure of the
bolt and result in a crash. See
Tightening Torque (p. 19).
WARNING!
To Next Page
Loading...
