LECTRICEBIKES.COM | 602.715.0907 29
Settings Menu
To change display settings, hold the plus (+) and the minus (-)
buttons simultaneously to enter into the Settings Menu. Press the
button to toggle between each numbered setting. To adjust the
value of each setting, click the plus (+) and the minus (-) buttons as
needed.
There are 21 settings (P01-P21). You should only change the settings
listed below.
Do not tamper with your bicycle. Tampering is dened as removing
or replacing any original equipment, or modifying your bicycle in
any way that may change its design and/or operation. Such changes
may seriously impair the handling, stability, and other aspects of the
bicycle, making it unsafe to ride. Tampering can void the warranty
and render your bicycle noncompliant with the applicable laws
and regulations. Lectric eBikes is not responsible for any direct,
incidental, or consequential damages, including, without limitation,
damages for personal injury, property damage, or economic losses
due to tampering.
To prevent serious injury or death, DO NOT change settings excluded
from the table. Changing setting not listed in the following table may
cause your bike to stop working properly. If you need the default
setting values of setting not listed, contact Lectric eBikes. DO NOT
ride your bicycle until the default settings have been restored.
WARNING!
WARNING!
To Next Page
Loading...
Need help?
General
