LECTRICEBIKES.COM | 602.715.0907 30
P04
P06
P09
Sleep
Tire Size
Throttle
Zero Start
10
20
0
LCD Display sleep timer. The
default setting will turn the
display OFF after it has not been
used for 10 minutes.
Used to compute speed and
distance traveled.
0: Throttle active from standstill.
1: Throttle active only when
already moving.
P10 Mode
Toggle
2 0: PAS Active, Throttle Inactive
1: PAS Inactive, Throttle Active
2: Both PAS and Throttle Active
Setting Default ExplanationFunction
P01
P02
Brightness
Distance Units
2
1
Backlight display brightness.
The darkest level is 1 and the
brightest level is 3.
0: KM; 1: MILE.
P11
PAS
Sensitivity
3
When set to higher numbers, it
will take more crank rotations
for the motor to turn ON. Lower
numbers will take fewer crank
rotations to turn the motor ON.
To Next Page
Loading...
