Lectron Portable Level 1 Charger 16A User Manual (English)

Questions and Answers:

B
Benjamin RussellJul 29, 2025
What to do if my Lectron Battery Charger fault light remains solid and the vehicle won't charge?
- F
  fhooperJul 29, 2025
  If the fault light on your Lectron Battery Charger is solid and your vehicle isn't charging, the handle might not be properly inserted. Inspect the handle, remove it, and then reinsert it into the vehicle's charging port until it clicks firmly in place. Also, the vehicle may not be ready to accept a charge. Check that the vehicle charge timer is set to allow charging, referring to your vehicle owner’s manual for instructions.
D
Dennis ColeAug 7, 2025
Why is the fault light blinking rapidly on my Lectron Portable Level 1 Charger 16A?
- S
  Sherry GreenAug 7, 2025
  A rapidly blinking fault light on your Lectron Battery Charger usually indicates a utility fault or that the charger has exceeded its temperature limit. First, disconnect the charger from the wall outlet and then reconnect it. If the blinking continues, have a qualified electrician check the ground circuit of the wall outlet. Also, the charger may be overheating. If the temperature is too high, the charger will restart charging when it cools down. Disconnect the charger from the wall outlet and have a qualified electrician inspect the wall outlet and adapter, as the house/socket wiring may be faulty.
J
Justin ColeAug 18, 2025
How to fix a Lectron Portable Level 1 Charger 16A Battery Charger when the charging light does not illuminate?
- S
  Shelley SheaAug 19, 2025
  If the charging light on your Lectron Battery Charger isn't lighting up, it could be due to a power issue. First, check the circuit breaker and any other loads on the circuit. Then, try plugging the charger into a different wall outlet. Make sure the charger module (and adapter, if you're using 120 VAC mode) is fully inserted into the wall outlet.