Lectron V-BOX 40A User Manual

3. Fix the J-hook to the wall, approximately 8 inches from the mounting plate.
4. Attach the V-BOX by lining up the slots at the back with the tabs on the
mounting plate.
Note: Adjust the the amp setting on the back of the V-BOX prior to mounting.
Page 5

Lectron V-BOX 40A Specifications

General

Output Current	40A
Altitude	Up to 2000m
Protection Features	Overvoltage, Overcurrent, Short Circuit
Operating Temperature	-20°C to +50°C
Humidity	5% to 95% (non-condensing)
Communication Interface	CAN
Cable Length	1.5 m