EasyManua.ls Logo

LECTURER LTC-S2007 - White Balance and PTZ Controls

LECTURER LTC-S2007
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
WHITE BALANCE
WHITE BALANCE menu is used to select from white balance modes. Available options:
MODE: AUTO, ATW(auto tracking), ONE PUSH, INDOOR, OUTDOOR, MANUAL.
“ONE PUSH:when in “ONE PUSH TRIGGER” mode, aim the camera at a pure white object
(say a white paper), then press OK button.
“MANUAL”mode: R.GAIN and B. GAIN value can be chosen from 0~255.
PAN/TILT/ZOOM
PAN/TILT/ZOOM is used to change pan/tilt/zoom value, available options:
PAN/TILT SPEED: 1, 2, 3, 4,5, 6, 7, 8 the bigger the number is, the faster the speed is. The speed
is the fastest in 1x zoom compared to other zooming times.
High speed: 15°~50°/step
Low speed: 4°~11°/step
PAN/TILT LIMIT: ON/OFF, once it is set as ON, below limit value can be set
UP: -30°~+90°, adjustable /step;
DOWN: -30°~+90°, adjustable 1°/step;
<PAN TILT ZOOM>
PAN/TILT SPEED 8
PAN/TILT LIMIT ON
UP +90
DOWN -30
LEFT +150
RIGHT -150
D-ZOOM LIMIT X4
PTZ TRIG AF ON/OFF
POWER UP ACT HOME
< WHITE BALANCE>
MODE MANUAL
R.GAIN 1
B.GAIN 128