Ledj Spectra Batten - DMX Values (Continued); Slave Mode; Sound Mode

LEDJ Spectra Batten DMX values
DMX Values: (CONT)
09CH
P3CH
Slave Mode:
To activate the Slave Mode, press the “MODE” button to show SlA-, this will now run
the Spectra batten in slave mode.
Sound Mode:
To activate the Sound Mode, press the “MODE” button to select SO.31, now the sound mode
is activated it will run one step at a time, you can adjust the sensitivity by using the “UP” and
“DOWN” buttons. (Sensitivity: SO01 - SO31, 01 = low, 31 = high)
CH1
0 - 255
RED 1
CH2
0 - 255
GREEN 1
CH3
0 - 255
BLUE 1
CH4
0 - 255
RED 2
CH5
0 - 255
GREEN 2
CH6
0 - 255
BLUE 2
CH7
0 - 255
RED 3
CH8
0 - 255
GREEN 3
CH9
0 - 255
BLUE 3
CH1
0 - 17: PG00
18 - 35: PG01
36 - 53: PG02
54 - 71: PG03
72 - 89: PG04
90 - 107: PG05
108 - 125: PG06
126 - 143: PG07
144 - 161: PG08
162 - 179: PG09
180 - 197: PG10
198 - 215: PG11
216 - 233: PG12
234 - 255 SOUND
CH2
0 - 255 select static colour
0 - 255 SPEED
0 - 255: SENSITIVITY
CH2
0 - 10: NO FLASH
11-255: FLASH
NOT USED