Need help?Do you have a question about the Ledj Spectra Batten and is the answer not in the manual?
Provides essential safety advice for installation, operation, and maintenance.
Warns about the risk of electric shock due to high voltage, advising caution.
Details crucial user responsibilities and precautions for safe operation and warranty.
Outlines potential dangers and warranty voidance from incorrect operation or installation.
Identifies physical components and connection points of the Spectra Batten.
Explains the function of the main control buttons for navigating menus and settings.
Details how to select and configure the 13 available built-in light programs.
Describes the mode that runs built-in programs in a continuous loop automatically.
Explains how to control the unit using a universal DMX controller.
Guides users on setting the DMX address and selecting the DMX channel mode (03CH, 09CH, P3CH).
Details the channel assignments and value ranges for the 3-channel DMX mode.
Provides channel assignments and parameter ranges for 9-channel and 3-channel DMX modes.
Explains how to synchronize multiple battens, with one acting as a master.
Describes how to activate sound-activated mode and adjust sensitivity.
Provides crucial advice on DMX cable construction, grounding, and line termination for reliable operation.
Details the conversion process for using 5-pin XLR connectors in a 3-pin DMX system.
Lists detailed technical specifications including LED configuration, dimensions, power, and operating conditions.
General| Type | LED Batten |
|---|---|
| IP Rating | IP20 |
| Power Supply | Internal |
| Frequency | 50/60Hz |
| LED Colours | RGB |
| Length | 1000mm |
| Control Protocol | DMX512 |
| DMX Channels | 4 |
| Input Voltage | 100~240V |
| Lifespan | 50, 000 hours |
To Next Page
