Section 1
INTRODUCTION
1-2
8500 Conveyor Paver
GENERAL INFORMATION
This manual contains Specification information,
Controls and Operating Procedures, Maintenance
and Repair Procedures and Parts Lists for the 785
Motor Grader.
SPECIFICATIONS
Refer to Section 2 - SPECIFICATIONS in this
manual for all major system specifications and for
typical torque value tables.
CONTROLS AND OPERATING
INSTRUCTIONS
Refer to Section 3 - OPERATION.
The operator of this equipment should READ,
UNDERSTAND, and FOLLOW the operating
instructions, Cautions, and Warnings provided in
the front of this manual and in the OPERATION
section.
WARNING: Do not attempt to operate the 785
Motor Grader unless fully trained
in the machine operation, only
authorized personnel should oper-
ate the Model 785 Motor Grader. All
instructions provided in this manu-
al and on the machine operating
and warning decals must be fol-
lowed to prevent damage to the
equipment and/or injury to operat-
ing personnel.
MAINTENANCE PROCEDURES
Refer to Section 4 - MAINTENANCE in this manual
for all maintenance and repair procedures.
CAUTION: All maintenance instructions
provided in this manual should be
followed to insure safety of the
personnel performing the
maintenance and to prevent
damage to the machine.
NAMEPLATE
The Nameplate, Figure 1-1, contain the serial
number and basic data used to identify the specific
model on the Motor Grader.
FIGURE 1-1. NAME PLATE
Courtesy of Machine.Market
To Next Page
Loading...
