When using the generator, make sure the total load is within rated output of a generator.
Otherwise, generator damage may occur.
0.4-0.75
(Efficiency 0.85)
Rated voltage 12v
Rated current 8.3A
TIP:
“~"means below.
Application wattage indicates when each device is used by itself.T
he simultaneous usage of AC and DC power is possible but total wattage should
not exceed the rated output.
EX:
The overload indicator light comes on when total wattage exceeds the application range.
(See page 12 for more details.).
NOTICE
Do not overload.The total load of all electrical appliances must not exceed the supply range of the
generator.overloading will damage the generator.
When supplying precision equipment,electronic controllers, Pcs, electronic computers, microcomputer based
equipment or battery chargers, keep the generator a sufficient distance away to prevent electrical
interference from the engine.Also ensure that electrical noise from the engine does not interfere with any
other electrical devices located near the generator.
lf the generator is to supply medical equipment, advice should first be obtained from the manufacturer, a
medical professional or hospital.
Some electrical appliances or general-purpose electric motors have high starting currents, and cannot
therefore be used, even if they lie within the supply ranges given in the above table.Consult the equipment
manufacturer for further advice.
Application Range
Inverter Generator Owner's Manual
To Next Page
Loading...