RCbro
®
SPARROW 2
User-Manual
LefeiRC www.lefeirc.com/
➢ How to use the RC to calibrate level?
FC is placed horizontally and kept still,choose a way to
dial the sticks as shown in the figure, until the three
green lights flash at the same time.
➢ How to use the RC to set direction of the servo?
*Must be completed before unlocking the RC.
Step 1: Check the feedback direction.
Step 2: If the feedback direction is not correct, turn the AIL or ELE stick to the maximum
position and hold it until the direction of the servo changes.
Step 3: Check the feedback direction again.
➢ How to set the RC direction?
*If the control direction is not correct, you can set the channel output reverse in the RC.
To Next Page
Loading...
