Need help?Do you have a question about the lefeirc RCbro SPARROW 3-OSD and is the answer not in the manual?
Details FC size, weight, power requirements, and supported RC receivers.
Explains the various connection ports on the device for ESC, power, and peripherals.
How to power the VTX and camera using the drone's battery.
Using an external BEC for VTX and camera power when battery voltage is too high.
Supports PWM, PPM, SBUS, IBUS, and CRSF protocols for receiver connection.
Steps for calibrating the RC transmitter and receiver for proper control.
Configuration for displaying RSSI signal strength for monitoring.
Guidance on the correct orientation for installing the flight controller on the aircraft.
Explanation of the On-Screen Display (OSD) elements and LED status indicators.
How to navigate and use the OSD menu for settings adjustments.
Comprehensive list and explanation of all configurable parameters for the flight controller.
Description of available flight modes like MAN, STAB, ACRO, ALT, FENCE, and RTH.
Procedures for assisted takeoff and Return To Home (RTH) functionality.
How throttle is managed in different flight modes and differential settings.
Testing and setting feedback and RC control directions for aircraft response.
Setting up failsafe behavior for loss of RC signal, including cut, pos hold, and custom modes.
Procedures for calibrating the flight controller's level and ESCs.
Conditions and steps for arming the motors based on GPS status.
Answers to common questions regarding RTH, motor beeping, and telemetry.
General| Brand | lefeirc |
|---|---|
| Model | RCbro SPARROW 3-OSD |
| Category | Computer Hardware |
| Language | English |
To Next Page