lefeirc SN-L - Control Surface and OSD; Control Surface Movement Verification; OSD Flight Information Display

SN-L user manual
5
Interface
Type
AIL ELE THR RUD AUX1 AUX2
Wing Servo1 Servo2 ESC ALL ALL
T tail AIL servo ELE servo ESC RUD servo ALL ALL
V tail AIL servo ELE servo1 ESC ELE servo1 ALL ALL
AUX channel
AUX channel can extend other functions, such as outputting RC channels, or multiplexing AIL，ELE，THR.
③ Correct Control Surfaces Movement
Switch to stab mode, your servo should move like this:
OSD Picture：
It is recommended to use a PAL camera to get a more detailed picture.
After Landing, OSD will show flight summary.
Air speed
Total voyage
Home Distance
Alt
Ground speed
Flight mode
Waring info