d. Wavelet is capable of setting the channel levels for you- this is useful for balancing your amplifier(s) with the internal amplifier(s). To do so,
click the back button and choose “Channel levels & driver polarity tests”.
e. Place the microphone that shipped with Wavelet at tweeter center height, 48” away from the left speaker, perpendicular to the speaker
baffle.
f. Your microphone has a 4-digit serial number on it, please enter it into the Wavelet app and click “Download microphone calibration file”.
g. Once it is downloaded, click proceed. (Note, if you have already downloaded the microphone calibration file, you will not need to download
it again.)
-Settings
-Setup
-Proceed
-Channel levels & driver polarity tests
To Next Page
Loading...
