Legacy VALOR User Manual

Outputs
Analog
 8 unbalanced output channels on 8 RCA connectors. 0 dBFS
*1
= 8 dBV
*2
, 33 Ohm output impedance.
Control Interface
 Ethernet, TP-Cable & WLAN
Processing
DSP
Physical
Dimensions
445 mm W x 301 mm D x 95 mm H / 17.52” W x 11.85” D x 3.74 H Weight 6.1 kg / 13.5 lbs
Digital
 SPDIF, 24 bit, 96 kHz
 TosLink, 24 bit, 96 kHz
 Analog Devices, internal processing sample rate 96kHz, bit depth 56 bits
The Bohmer Correction is a loudspeaker in-room energy-time alignment that optimizes the loudspeaker room acoustic transfer function in
both frequency and predominantly time domain. Working with revolutionary new algorithms is starts with a psychoacoustically based
measurement method. Alignment errors are then optimized individually, not resorting to the common crude bulk correction over the entire
frequency spectra. The Algorithms use psycho acoustic reasoning for alignment and correction of the loudspeaker room transfer function.
The correction improves sound quality in the whole room, provides improved transient response, clarity & soundstaging and gives a relaxed
sound without rough edges or any booming.
 8 balanced output channles on 8 XLR connectors. 0 dBFS
*1
= 8 dBV
*2
, 33 Ohm output impedance. An analog output level increase of 6 dB is
available through internal jumpers offering 0 dBFS = 14 dBV
23 of 50

Legacy VALOR Specifications

General

Brand	Legacy
Model	VALOR
Category	Speaker System
Language	English