Need help?Do you have a question about the Legend Pro Classic Series and is the answer not in the manual?
Explains winch strap feed and locking clip securing to bow eye.
Instructions on using and positioning the jack and dolly wheel for maneuvering.
Importance of checking nuts/bolts and function/lubrication of bearing buddies.
Inspect lights, tighten bolts, and secure boat with tie downs.
Steps to adjust coupler and procedure to replace tail light bulb.
A comprehensive checklist of pre-launch safety and operational checks.
Guidance on trailer turning, reversing, and safe towing practices.
Steps for launching the boat and allowing the engine to warm up.
Procedures for loading gear/passengers and safely maneuvering away from the dock.
How to accelerate to planing speed and use power trim for performance.
Precautions for using full stand-up tops in various water conditions.
Step-by-step guide to starting, operating, and breaking in the outboard motor.
Instructions for cowl removal and identifying engine fuses, cord, and dipstick.
Courtesy tips for preparing the boat for loading away from the ramp.
Steps for securing the boat on the trailer, outboard trim, and cover prep.
Diagrams illustrating features of Utility and Single Console boat models.
Diagrams illustrating features of Full Windshield and Pontoon boat models.
Operation of trolling motors and location of boat batteries.
Trolling motor plug-in location and explanation of navigational lights/bilge pump switches.
Operation of livewell, horn, and fish/depth finder systems.
Information on circuit breakers, 12V outlets, and seat base adjustments.
Steps for installing custom travel, bow to stern, and cockpit covers.
Detailed step-by-step instructions for installing a full stand-up top.
Overview of Pro Classic, Gen X, Pontoon warranties, and Product Protection.
Details on warranty coverage for engine and lower unit internal parts.
Warranty coverage for specific systems (fuel, electrical) and packages (trailer).
To Next Page
General