Repeat symm at the back.
Put a F 12x1 hor on the front edge, skipping five columns from
the left.
Put a F 3x1 hor to the right.
Put a F 8x1 hor to the right.
Repeat steps 5-7 symm at the back. Lay aside.
Bag 19. Make the cabin (the front of the train, at the left).
Number 1.
Put a 2x1/2x1 step piece with two side buttons ver on the table,
the side buttons to the left.
Put the other such piece the same way to the back.
Connect by putting a F 10x2 hor on the lower steps, in the
middle, overhanging to the right.
Number 2.
Put a 6x2 step piece with four side buttons hor underneath the
front row of the 10x2 piece, the side buttons to the front, to
the right of the 2x1/2x1 piece.
Repeat symm at the back.
Number 3.
Put a 2x1 ribbed slide piece hor on the front edge, skipping the
leftmost button, the slide to the right.
Repeat symm at the back.
Put a FS 4x2 hor in between the two PPs and to the right.
Put a FS 2x1 ver to the right.
Put a f2x1 with a vertical clasp hor to the right of the front
row of the PP, the clasp to the right.
Repeat symm to the back.
Number 4.
Put a seat piece ver to the right, the back of the seat to the
right.
Skip one column to the left and put a F 2x1 ver there, to the
left of the clasps.
Put a 2x1 with vertical clasp ver in the middle of the left edge
To Next Page
Loading...
